env -- languardian specific

Syntax

env [/d]

Parameters

[/d]

Resets to the default environment.

Example

To change the ethernet port number for the UUNET LanGuardian to 00.C0.87.12.34.56, enter the env command. Each line of the default environment listed above will be displated for modification. Editting of the ethernet port number begins at the seventh digit, and the dots must be entered also.

Ethernet port 0 = 00.C0.87.xx.xx.xx
Ethernet port 1 = 00.C0.87.xx.xx.xx
Auto boot = Y
Auto boot timeout = 10
Boot Device = 10
Boot Spec =

Enter y to update the NVRAM and save the changes to the environment.

Notes

The default environment for the UUNET LanGuardian is:

Ethernet port 0 = 00.C0.87.xx.xx.xx
Ethernet port 1 = 00.C0.87.xx.xx.xx
Auto boot = Y
Auto boot timeout = 10
Boot Device = 10
Boot Spec =

Note that the ethernet port number is a unique number, based on teh board serial number, and the first six digits are fixed.

Back

Comments or Questions? send email to : languard (at) pix (dot) net